奔驰宝马娱乐

  • 手机:15552522412
  • 邮编:250100
  • 联系人:张经理
  • 网址:
  • 地址:济南市历山路
新闻中心当前位置:首页-新闻中心
    地热管道清洗机工作原理
    2018-08-27 16:03:23
    将清洗介质自来水或供暖水接入地热清洗机,然后根据实践工况发射不同频率和波长的物理气压脉冲,对地热管路内壁进行冲刷和震动使管路内部的锈垢和淤泥脱离管壁,并经排污端排出地热体系。
    The cleaning medium tap water or heating water is connected to the geothermal cleaner, and then the physical pressure pulse of different frequencies and wavelengths is emitted according to the practical working conditions. The inner wall of the geothermal pipeline is scoured and vibrated so that the rust and mud inside the pipeline are separated from the pipe wall, and the geothermal system is discharged through the sewage end.
    地热清洗施工程序
    Geothermal cleaning procedure
    1.衔接(一切衔接有必要结实可靠)
    1. convergence (all links need to be strong and reliable).
    2.封闭地热主管路进、回水切割阀门,泄掉地热体系内部残余压力;
    2. close the geothermal pipe and cut back the valve to drain the residual pressure in the geothermal system.
    3.用脉冲输出管将地暖清洗机和分水器的进水相衔接;
    3. use pulse output tube to connect the floor heating washer and the water inlet of the water distributor.
    4.用进水管将水源和脉冲地暖清洗机的进水口相衔接;
    4. use the inlet pipe to connect the water source and the intake of the pulse ground heating cleaner.
    5.排污管的接口端衔接分水器回水,另一端刺进污水缓冲设备。

    5. the interface of the drain pipe is connected with the water return of the water distributor and the other end is stuck into the sewage buffer equipment.

    济南管道疏通

    6.发动、清洗
    6. start and clean
    7.接好空气压缩机和脉冲地热清洗机电源,发动压缩机使其作业到达5-7个压力;
    7. Connect the air compressor and pulse geothermal cleaning machine power, start the compressor to work to reach 5-7 pressure;
    8.先翻开气源,再翻开水源;
    8. first turn on the source of gas and then turn on the water.
    9.第一遍清洗。发动地暖清洗机开始第一遍清洗(请遵循先开下一路,再关上一路的操作规则),第一遍清洗主要是将地热管里残留的水打出来,一起检验地热管路是否有阻塞。第一遍清洗要注意操控进气速度,调查缓冲器的水位,避免缓冲器溢流形成污染。
    9. clean the first time. Start the first cleaning of the heating machine (please follow the operating rules of opening the next road, then closing the road), the first cleaning is mainly to remove residual water from the geothermal pipe, together with the test of whether the geothermal pipe is blocked. The first cleaning should pay attention to control the intake speed, investigate the water level of the buffer, to avoid the buffer overflow pollution.
    10第二遍清洗,重新发动地热清洗机,依照新设定的频率逐根清洗;第三遍清洗可将数值调小些,改变频率和波长,直至见到清水。
    10 The second cleaning, re-start the geothermal cleaning machine, according to the new set frequency cleaning root by root; the third cleaning can reduce the value, change the frequency and wavelength, until see clear water.
    11.承认清洗洁净后,封闭自来水和空气压缩机,并将各衔接收和地暖清洗机中残留的水扫净,避免运送过程中发作冻住、冻裂。
    11. Recognize the cleanliness, close the tap water and air compressor, and sweep the residual water from the receiving and floor heating cleaners to avoid freezing and cracking during transportation.
    (文章由:济南圣果管道清运有限公司,对济南管道疏通感兴趣的朋友可以关注我们的官网:,我们将为您提供新的热点新闻)
    (article by: Jinan Shengguo Pipeline Clearing Co., Ltd., Jinan pipeline dredging interested friends can pay attention to our official website: , we will provide you with new hot news)
友情链接:天天彩票首页  天天彩票官网  天天彩票官方网址  天天彩票开奖记录数据分析  天天彩票主页  天天彩票官网  天天彩票网址是多少  天天彩票官方网址  天天彩票导航网  天天彩票导航  天天彩票开户  天天彩票导航  天天彩票是真的吗  天天彩票官方网址  天天彩票导航网  天天彩票官方网址  天天彩票网站  天天彩票官方网址  天天彩票官方网站  天天彩票手机官网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!

CopyRight